Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- tasmota_befehle [2025/05/29 02:30] – angelegt admin
+++ tasmota_befehle [2025/10/18 05:16] (aktuell) – admin
@@ Zeile 1: / Zeile 1: @@
+==== Kommandos für Tasmota ====
+[[shelly2tasmota|shelly2tasmota]]
+originale Doku [[https://tasmota.github.io/docs/Commands]]
 Uhr konfigurieren für Ense Waltringen
 code an der konsole eingeben
+<file>
 Backlog Latitude 51.506937382540094; Longitude 7.924516971763192; TimeDST 0,0,3,1,1,120; TimeSTD 0,0,10,1,1,60; TimeZone 99
+</file>
+ESP CPU Temperatur anzeigen
+<file>
+SetOption146 1
+</file>
+Einblenden Hostname und IP
+<code>
+Setoption53 1
+</code>
+Uhrzeit anzeigen
+<code>
+#Nur Stunde und Minute
+WebTime 11,16
+# Stunde:Minute:Sekunde
+WebTime 11,19
+</code>
+<code>
+# Sensorwerte alle 60 Sekunden senden
+TelePeriod 60
+</code>
+==== Camera ====
+<code>
+Command 	Parameters
+Wc 	Query all camera settings
+WcAEC 	1 = enable auto exposure control (sensor), 0 = disable (default)
+WcAECDSP 	1 = enable auto exposure control (DSP), 0 = disable (default)
+WcAECValue 	0..1024 = setauto exposure control value
+WcAELevel 	-2..+2 = set auto exposure control level
+WcAGC 	1 = enable auto gain control, 0 = disable (default)
+WcAGCGain 	0..30 = set auto gain control gain value
+WcAWB 	1 = enable Auto White Balance, 0 = disable (default)
+WcAWBGain 	1 = enable Auto White Balance Gain, 0 = disable (default)
+WcBPC 	1 = enable Black Pixel Correct, 0 = disable (default)
+WcBrightness 	-2..+2 = set picture brightness
+WcClock 	10..200 = set clock speed in MHz (default = 20)
+WcColorbar 	1 = show colorbar, 0 = hide colorbar (default)
+WcContrast 	-2..+2 = set picture contrast
+WcDCW 	1 = enable downscale, 0 = disable (default)
+WcFeature 	Extended features. Only boards with PSRAM should be used.
+= off, 1 = reduce FPS and increase exposure time for better low light performance, 2 = nightmode, increase exposure time and lower the Framerate depending on available light
+WcFlip 	1 = enable flip camera image,0 = disable (default)
+WcGainCeiling 	0 .. 6 = set gain ceiling (0 = x2, 1 = x4, 2 = x8, 3 = x16, 4 = x32, 5 = x64, 6 = x128)
+WcGammaCorrect 	1 = enable auto gamma correct, 0 = disable (default)
+WcInit 	Initialize camera
+WcLensCorrect1 = enable auto lens correct, 0 = disable (default)
+WcMirror 	1 = enable mirror camera image, 0 = disable (default)
+WcResolution 	Set camera resolution.
+= 96x96 (96x96)
+= QQVGA2 (128x160)
+= QCIF (176x144)
+= HQVGA (240x176)
+= QVGA (320x240)
+= CIF (400x296)
+= VGA (640x480)
+= SVGA (800x600)
+= XGA (1024x768)
+= SXGA (1280x1024)
+= UXGA (1600x1200)
+WcRtsp 	(Requires defined ENABLE_RTSPSERVER)
+= start RTSP server (forces restart) , 0 = stop server
+WcSaturation 	-2..+2 = set picture saturation
+WcSpecialEffect 	Set picture effect: 0 = off, 1 = Negative, 2 = Grayscale, 3 = Red Tint, 4 = Green Tint, 5 = Blue Tint, 6 = Sepia
+WcStats 	show statistics
+WcStream 	1 = start webcam stream at http://<device_ip>:81/stream or http://<device_ip>:81/cam.mjpeg
+= stop stream
+WcWBMode 	White Balance Mode
+= auto, 1 = Sunny, 2 = Cloudy, 3 = Office, 4 = Home
+WcWPC 	1 = enable White Pixel Correct, 0 = disable (default)
+WcAuth 	1 = enable basic Authentication for stream and screenshot urls, 0 = disable (default)
+</code>